Maintenance of PVC floor maintenance

⒈ shall promptly remove all dirt floor.
⒉ absolute prohibition floor soaked in clear water, although some ground with waterproof glue cut off water supply (eg floor drain, water room, etc.), but for a long time to be immersed in water, it will seriously affect the life of the floor. Cleaning process in a timely manner with the suction machine to suck sewage.
⒊ for pedestrian flow, wear large areas should reduce maintenance cycles, increase high-strength surface wax waxing passes.
⒋ Never use hard, rough cleaning appliances (such as steel wool, scouring pads, etc.), to prevent sharp objects collision resilient floor.
⒌ strongly recommended in high traffic public places entrance mats placed rub, to prevent dirt and grit into the flooring stain scratch.
Different stages of conservation
(A) after completion of laying on the floor / cleaning and maintenance prior to use
⒈ dust on the first floor surface, debris removal.
⒉ with red 3M rubbing grinding machine plus or similar products in low clean sheet (after a powerful general-purpose detergent added 1:20 diluted watered grazing machine), remove the protective wax, grease, dust and other dirt floor surface, with sewage suction machine dry.
⒊ with water to wash, dry.
⒋ as required, on the strong side 1-2 storey wax.
Cleaners: strong surface high-strength general-purpose cleaner wax
Tools: grinding mill machine red suction machine wax trailers water squeezing machine
(B) the daily cleaning and maintenance
⒈ push dust or vacuum cleaner. (Will be towing dusts drag on the ground, were pushing dust, dry.)
⒉ wet drag. (1:20 diluted with water to clean the floor with polish, mopping the floor with a wet mop.) If necessary, wipe the machine can also be used with low wash wash & shine.
Cleaner: to towing dusts floor cleaning polish
Tools: pushing dust mop
(Iii) Regular cleaning and maintenance
⒈ push dust or vacuum cleaner.
⒉ floor cleaner polishes 1:20 diluted with water, carry out mopping the floor or with high-speed polishing machine plus red refiner plates wear and tear.
⒊ on the strong side 1-2 storey wax.
⒋ if necessary, can be used with high-speed polishing machine plus white polishing pad polishing.
Cleaner: Clean floor wax polish high-strength side
Tools: dust grind machine red, white wax trailers suction machine grinding machine pressing water
(D) A thorough refurbishing process
⒈ push dust or vacuum cleaner.
⒉ wax with a strong water after 1:10 dilution evenly coated on the ground, and so on for 5-10 minutes, rub the red grinding machine plus a low speed cleaning, to wax. Timely sewage suction machine dry.
⒊ with water to wash, dry, until the ground without leaving any residual detergent.
⒋ as required, on the strong side 1-2 storey wax.
Cleaner: Clean floor wax polish high-strength side
Tools: dust grind machine red, white wax trailers suction machine grinding machine pressing water
(5) The special soil treatment
⒈ oil: local oil, aqueous degreaser liquid directly on the towel; large area of ​​oil, will be the only special water-based degreaser diluted 1:10 with rubbing grinding machine plus red low clean.
⒉ black Offset: Use spray cleaning maintenance wax with high-speed polishing machine plus white polishing pad polishing. For a long time the black offset printing, it can be a strong black offset remover directly on the towel process.
⒊ gum or chewing gum: with a professional force in addition to glue directly on a towel to wipe away except Sassafras.
Cleaners: Aqueous Degreaser spray clean maintenance wax strong black offset a strong addition to glue remover.